DOKA FORMING SYSTEMS
 VIEW PRODUCT BROCHURE  

SLAB/HORIZONTAL (PROTECTION)
  COVERGUARD 

TAPER TIE (TIEING/HANDSET)
  X-PLUG 

CEMENT/PREMIX
  PERMA-PATCH®

POLISHERS
  DS 301 HAND HELD POLISHER
  
DS 302 SINGLE HEAD WALK BEHIND POLISHER
  DS 605 DUAL HEAD POLISHER
 DIAMOND CUP GRINDING PADS 
 DRY RESIN POLISHING PADS
 WET RESIN POLISHING PADS

 



VIEW TECHNICAL DATASHEET

Cover guard®
A flame retardent polyethylene film designed specifically for the temporary protection of hard, non-porous surfaces. Provides a slip resistant protection in DP (embossed with anti-slip diamond plate pattern). Cover guard® is supplied in 10 to 40 mil thickness and is available in two widths for use in corridors and public spaces. It is extremely durable, tough, tear resistant and offers total protection against impacts, indentations, and markings. It is resistant to most chemicals, paints, over-spray, dirt, dust, debris, and is waterproof. Cover guard® is quick, easy and efficient to install and remove. Cutting and shaping is simple. The product is easy to clean and is reusable. General applications range from the protection of tile, terrazzo, stone & marble, vinyl, linoleum, wood, steel, poured resin floors, walkways, open areas and vertical surfaces. Comes in ocean blue color. 
 

No. Finish

Thickness

Roll Width

Roll Length

Coverage

Wt/Roll (lbs)

Qty/Pallet

Wt/Pallet (lbs)

CG 1036DP Diamond Plate

10 mil

3'

393'

1180 Ft2

60.0 

16

960.0

CG 1072DP Diamond Plate

10 mil

6'

393'

2358 Ft2

120.0

9

1080.0

CG 2536DP Diamond Plate

25 mil

3'

180'

540 Ft2

72.0

12

864.0

CG 2572DP Diamond Plate

25 mil

6'

180'

1080 Ft2

140.0

1260.0

CG 4036DP Diamond Plate

40 mil

3'

120'

360 Ft2

70.0

9

630.0

CG 4072DP Diamond Plate

40 mil

6'

120'

720 Ft2

150.0

9

1350.0

 

Cover guard 

RETURN TO TOP



TAPER TIE (TIEING/HANDSET)
 

PDF ICON VIEW PDF (CATALOG PAGE 99)
 

X-PLUG

A mechanical plug specifically designed to seal the void formed in a concrete wall by the removal of a tie rod. The X-Plug is easily engaged into the tie rod void during ALL climates. With its mechanical design, tightening of the metal nut causes an expansion of the plug, increasing its diameter inside the tie rod void. This action simultaneously compresses the main body plug onto the bolt to create a seal between the plug and the wall of the tie rod void. Designed to install at 50% of wall thickness for varying tie sizes. Can also be set for shallow depth plug placement. Able to be installed interior/exterior or retro-fitted  to repair leaks. Can also be utilized as backing for grouting.
 
Materials: EPDM
Hardware: 304 Stainless Steel

 
No.  Taper Tie Size  Wt (lbs) 
XP 5834 5/8" - 3/4"

0.10

XP 5878 5/8" - 7/8"

0.10

XP 341 3/4" - 1"

0.11

XP 1114 1" - 1-1/4"

0.11

XP 4112 1-1/4" - 1-1/2"

0.15

Accessories
XP BRU341 Brush for 5/8" - 1" Hole 

6 oz.

XP BRU1114 Brush for 1" - 1-1/4" Hole

6 oz.

XP BRU4112 Brush for 1-1/4" - 1-1/2" Hole

6 oz.

XP EXT1512 X-Plug 15" Installation Extension Socket   

1.50


X-Plug


 
X-Plug Installation  Step 1:
Clear tie hole of all loose debris. Taper tie brush is available upon request. 
Step 2:
Check plug engagement, making sure plug is slightly less in size than void. Minor adjustments can be made by simply tightening nut for shallow depth placement.
Step 3:
Attach deep well socket and extension onto nut. Place plug at desired depth or specification. FULLY TIGHTEN NUT.
Step 4:
Once nut has been fully tightened pull socket/extension out of void. THAT'S IT! Move on to the next void and repeat. Fill with grout if needed.

RETURN TO TOP



CEMENT/PREMIX 

VIEW TECHNICAL DATASHEET
Perma-Patch®

Description: A high tech cold patch repair material. Can be applied in any weather conditions. On blacktop or concrete. Just pour it in...it's done! 

No.         Size
RI PP 60 lb. bag, 50/pallet
Application: Patching for quick and permanent repairs of potholes, cracks, cable trenches, utility cuts, around manhole covers and sections touching expansion joints. Can be applied to parking lots, bridges, roads and utilities.

Specifications: Temperature usage range between -15 degrees F to 104 degrees F)

Coverage: A 60 lb. bag of Perma-Patch® fills approximately 0.48 cu. ft.

 

RETURN TO TOP




POLISHERS

PDF ICON VIEW POLISHERS PDF (CATALOG PAGE 71-A)

DS 301 HAND HELD POLISHER

DS 301 HAND HELD POLISHER DS 301 HAND HELD POLISHER

  • Rugged, hand-operated 12 inch platform that grinds, hones and polishes concrete surfaces.
  • Uses 3 diamond polishing pads or cup wheels.
  • Operates wet or dry (with use of optional cowl).
  • 'Planetary', gear-driven tool.
  • 12 inch platform turns at a lower rate than the higher rotational speed (> 2000 rpm) of 5 inch platens.
  • This rpm speed provides the best speed for diamond polishing.
  • Unit is powered by a heavy duty FEIN variable speed polisher.
  • Center coolant feed.
  • Precision bearings.
  • Sturdy construction.

RETURN TO TOP



DS 302 SINGLE HEAD WALK BEHIND POLISHER

DS 302 SINGLE HEAD WALK BEHIND POLISHER

  • Rugged, 20 HP walk-behind floor version of the DS301 with a 12" platform that grinds, hones and polishes concrete surfaces.
  • Uses three 5" diamond polishing pads or cup wheels.
  • Driven by 2 HP Baldor electric motor and controller. Controller may be set for 110V or 220V input power.
  • Ideal for use in tight areas, edging under toe kicks, steps and floor surfaces up to 1,000 square feet.
  • Has enough power to grind with heavy duty cup grinding wheels and enough speed for fast polishing.
  • Additional weight up front (up to 50lbs) may be added for heavy grinding. (weight included).
  • Slurry skirt, center coolant feed and 1" vacuum port included.

RETURN TO TOP



DS 605 DUAL HEAD POLISHER

DS 605 DUAL HEAD POLISHER

  • An ultra powerful 5HP twin head walk behind grinder-polisher that is 50 pounds heavier than the DS602.  Six rotating floating heads on the surface backed by 220V single phase power (other voltage options available - see specifications).
  • Variable speed adjustment knob.
  • Uses the same planetary surface system as the DS602.
  • Each planetary unit has 3 rotating heads (total of 6 on the machine), each with a 5/8-11 spindle.
  • For polishing, 5" Velco® backup platens allow easy attachment of diamond polishing discs.

RETURN TO TOP



DIAMOND CUP GRINDING PADS

Diamond Cup Grinding Pads

  • Cup wheels efficiently grind all types of concrete, masonry, brick, block and stone. 
  • Medium grit used for basic grinding and removal.
  • Fine grit used for a smoother finish.

RETURN TO TOP




DRY RESIN POLISHING PADS



Dry Resin Polishing Pads

  • Hard wet resin polishing pads combine the benefits of resin and its ultra smooth finish with the longevity of diamonds.
  • Wet resin discs last up to 4 times longer than dry discs when used correctly with water.
  • Available in 50 through 3000 grit (although typical wet sequence used is through 400 grit).

     

RETURN TO TOP


 

 


WET RESIN POLISHING PADS


Wet Resin Polishing Pads

 

  • Dry resin polishing pads can produce a mirror finish quickly and easily. 
  • Available in 800 and 1500 grits.

RETURN TO TOP