Masons Supply sells exclusively to contractors and industrial customers in Oregon and Washington.
Catalogs: Liquid & Powder 2005: 3050 Admixtures for Concrete & Mortar: Grout Fluidifier/Pumping Aids
 |
||
|
|
Read manufacturers' data sheets for
complete specifications, installation procedures, and MSDS
precautions. |
|
|
|
||
|
Description : A fluidifer for grouts and concrete that promotes flowability, reduces water requirements, reduces bleeding and segregation, increases strength and eliminates setting shrinkage.
|
Application: The excellent fluidity and flowability make it ideal for pumping grout into block walls, under slabs and foundations, filling cracks and crevices in dams and piers, shoring up deteriorated beams and columns, and pumping augured cast-in-place piles. |
Applicable Standards : ASTM C-937 & CRD C-619.Dosage : 1 lb. approximately is recommended for each 100 lbs. of cementitous material to provide proper expansion and fluidifying characteristics. Should be added in powdered form to the grout mix at the job site. |
||||
|
Description : A dry powder concrete pumping aid packaged in a patented, ready to use, water soluble bag. Provides the concrete pumper with a cost effective method for improving the pumpability of hard to pump and/or harsh concrete and grout mixes. Additionally, it reduces line pressure. It does not contain calcium chloride, nitrates, or other potentially corrosive materials.
|
Application: Improves pumpability of hard to pump mixes. It also decreases hose pressure. | Dosage: Approximately 1.5 to 3 ounces per cubic yard of concrete or grout. Typically, one 8 oz. bag will treat 4-5 cubic yards. | ||||||||||
[NEW
WEB SITE] [About Us] [Project
Focuses] [Locations] [Catalogs]
[CASTinTACT™]
[Line Card] [Order Form]
[Data Sheets/MSDS]
© Copyright Masons Supply Company. All rights reserved.