Masons Supply: Catalogs: Liquid & Powder 2005

Masons Supply sells exclusively to contractors and industrial customers in Oregon and Washington.

Catalogs: Liquid & Powder 2005: 3250 General Purpose Adhesives


	Read manufacturers' data sheets for complete specifications, installation procedures, and MSDS precautions. Warning: Chronic health effect possible—inhalation of silica dust may cause lung injury/disease (Silicosis). Take appropriate measures to avoid breathing dust. Click here for more information.

200 Adhesive

Description: A very efficient high performance adhesive for multipurpose use on paneling, plywood, light construction, and drywall installations. Composed of synthetic rubber resins and petroleum distillates. Can be used both interior and exterior. Advantages are: resistant to moisture, dampness, and temperature changes; fast initial bond strength; more holding power than nails; easy pumpability, even in cold temperatures; non-staining; and, fast, easy and economical for installation of polystyrene insulation.

No.	Size
SB QT200	825 ml, 12/case, 26 lbs.

Application: Can be used on drywall, furring strips, ceramic tile, masonry, mineral board, molding, plywood, wood, concrete, fiber ceiling tile, paneling, wallboard, aluminum, vinyl cove base, imitation stone and brick. Can be used as a general purpose construction adhesive. Excellent for low temperature installation, e.g. in cooler rooms and freezers.

Coverage: 135 lin. ft. per 825 ml cartridge when applied at ¼" bead.

TriggerFoam™

Description: A 1 part polyurethane expanding foam which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the 2 fold expansion of the foam after it leaves the nozzle. The surface of the foam initially dries within 1-4 hrs and becomes fully cured in 12-15 hrs. Sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hrs elapse prior to scraping, sanding, staining or painting. CFC free propellant. Flame retardant. Does not rot or deteriorate with age. Polyurethane system. Contains no urea formaldehyde or PCBs. Neutral odor.

No.	Size
RL 8136	29 fl. oz. cartridge, 12/case, 20 lbs.
Accessories:
RL 8140	Applicator tool
RL 8142	20 fl. oz. cleaner, 12/case, 20 lbs.

Application: Dispensed through a special gun that allows the user to control the rate of flow as well as the size of the bead for more precise placement of the product, allowing it to be used in a wide variety of applications. Use it to fill, seal or insulate. It blocks drafts, stops leaks, saves energy, adheres to all types of construction material, deadens sound, acts as a buoyancy material. Once cured, controls radon and can be used in HVAC applications. Insulating uses: around window frames, sills, door frames floor/wall joints, electrical junction boxes, attics, refrigeration units and pipes, and air conditioning systems. Filling uses: breaches in walls, pipe penetrations in non-fire-rated walls, voids in concrete forms, Underground utility ductwork, and sound dampening.

Applicable Standards:

Underwriters Laboratories - File Numbers R16754 and 9KX2 DIN Std. 4102 Part 1, Section 6.2.5.2 - Test Certificates PZ IV/00-063 & PZ IC/00-068

Specifications:
Tack Free: 5–10 min
Cure Times:
Initial 1–4 hrs
Final 12–15 hrs

Coverage: 1.4–1.6 ft² free foam/cartridge.

[NEW WEB SITE] [About Us] [Project Focuses] [Locations] [Catalogs] [CASTinTACT™]
[Line Card] [Order Form] [Data Sheets/MSDS]