Fibril-Pro Overview

Click here to print the Fibril Pro Specification Sheet (PDF)

Click here to print the Fibril Pro Material Safety Data Sheet (MSDS) (PDF)

DESCRIPTION

FIBRIL-PROTM, a Microsynthetic Fiber, is a 400-denier fibrillated polypropylene fiber manufactured by ABC from 100% virgin homopolymer polypropylene resins. This product introduces considerably more fibrillated bundles to the concrete matrix. These bundles are easy to distribute and finish. The fiber spacing is considerably less than the standard fibrillated products, thus providing increased resistance to plastic shrinkage cracking and drying shrinkage cracking.

PHYSICAL PROPERTIES
Specific Gravity 0.91
Melt Point 320°F (160°C)
Ignition Point 1,094ºF (590ºC)
Water Absorption Nil
Acid and Alkali Resistance Excellent
Modulus of Elasticity 800 ksi
Tenacity 4.5 grams/den
Available Lengths 1/2” (12mm), 3/4 (19mm), 1” (25mm)

GENERAL

FIBRIL-PROTM is designed to distribute quickly throughout the concrete mix. The fibrillation pattern was designed to optimize the mechanical bond between the mortar matrix and the fiber networks. The enhanced mechanical bond means that the product provides better control of plastic shrinkage and drying shrinkage cracking. FIBRIL-PRO is an excellent secondary reinforcement option when used at 1.50 pcy.

APPLICATIONS

  • Residential and Commercial Slabs-on-Ground
  • Ultra Thin Whitetopping
  • Architectural Precast Products and Ornamental Elements
  • Irrigation Ditches/Channels
  • Shotcrete Applications

FEATURES & BENEFITS

  • Excellent Distribution
  • Excellent temperature-shrinkage reinforcement
  • Modifies macro-micro cracking mechanism
  • Reduces plastic settlement
  • Extends service life with reduced maintenance
  • Enhances Fatigue Strength
  • Enhances impact, pullout and surface abrasion resistance
  • Reduces permeability

PRODUCT APPROVALS

FIBRIL-PRO conforms to the requirements of ASTM C1116, Section 4.1.3 and Note 2 as well as meeting the requirements of ICC ES AC32 Sections 3.1.1 (plastic shrinkage reinforcement) and 3.1.2 (temperature-shrinkage reinforcement).

MANUFACTURER’S RECOMMENDATIONS:

FIBRIL-PRO is a fibrillated polypropylene fiber used primarily as secondary/temperature-shrinkage reinforcement in concrete. The standard dosage rate for FIBRIL-PRO is 1.5 pcy. FIBRIL-PRO is an excellent replacement for conventional secondary reinforcement. FIBRIL-PRO is proactive not reactive, in that it is distributed throughout the cross section dimensionally.

FIBRIL-PRO is packaged in pre-weighed, degradable bags that can be added directly to the mixing system. The bags can be introduced at any time during the mixing cycle, except at the same time as the cement. Three to five minutes will be required to disperse the fibers depending on when the product is added to the mixer.

ENGINEERING SPECIFICATIONS:

When specifying an option to conventional secondary reinforcement, FIBRIL-PRO is the answer. FIBRIL-PRO outperforms the other Microsynthetic Fibers when it comes to providing the optimum 3-dimensional temperature-shrinkage reinforcement system for concrete. A principle reason for this is the additional fibril elements available to the concrete matrix due to the ultra low denier.

Specify 0.75” long fibrillated polypropylene fiber FIBRIL-PRO at 1.50 pcy (0.9-kgs/m³) as the secondary reinforcement in Plain Structural Concrete. FIBRIL-PRO meets the requirements of ASTM C1116, Section 4.1.3 and Note 2 plus ICC ES AC32 , Sections 3.1.1 and 3.1.2

PACKAGING AND SHIPPING

We strive to meet our customers’ needs and specifications by shipping our fiber in an inexpensive and timely manner, and by packaging our fiber in infinite ways. We ship within 48-hours of purchase order receipt for less than truckload orders. We can package into bags as small as 0.50-lb. and as large as 30-lbs. Our pallets range in weight from 648-lbs. to 1080-lbs. We remember that we are here because of our customers, and we strive to keep them happy!

 

WARRANTY AND LIMITATION OF LIABILITY

As used herein, the term “ABC” shall refer to ABC Polymer Industries, LLC and its subsidiaries.

The terms of ABC’s invoices shall be governed by and construed in accordance with the laws of the State of Alabama.

ABC’s fibers are intended to reduce plastic shrinkage cracking and provide secondary temperature-shrinkage reinforcement. ABC’s fibers should not be used as structural reinforcement. ABC Polymer Industries, LLC warrants that the product sold hereunder is of merchantable quality and conforms to the seller’s standards and specifications. The seller’s sole liability for claim shall be limited to replacement of defective or non-conforming product. In no event shall the seller be liable for any special, incidental, consequential, or exemplary damages. ABC Polymer Industries, LLC recommends that each user determine the suitability of the product(s) for their particular application.

ABC engineering and sales personnel are available to assist in selecting the appropriate fiber for a given specification / application. Said personnel will provide an overview of anticipated performance based upon experience and testing data. ABC personnel will provide recommendations, but are not the final arbiters on design. ABC personnel will provide onsite support where our products are utilized and when deemed necessary, but will not participate in the supervision of any project. ABC’s responsibility is to support our customers and to provide our customers with the best materials and assistance in marketing these products.