MASCO Catalog: Concrete Forming & Accessories

156 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T INSERTS NC Plastic Threaded Plugs The Threaded Plastic Plug is manufactured with National Course (NC) threads to fit 3/8", 1/2", 5/8", 3/4", 7/8" and 1" NC threaded inserts. A hole is provided through the plug that may be used to attach (nail) the plug to the form. Ferrule Loop NC Insert The Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. The Loop Ferrule Insert is available in the sizes shown in the chart below and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance. *SWL is based on 1/2" set back from face of concrete SWL provides a factor of safety of approximately 3 to 1 in 3,000 psi normal weight concrete. Consult manufactures data on values on shear and reduced edge distance. Not for use as a lifting insert. Note: Masons Supply does not recommend 1/2" diameter bolts for lifting/handling of precast concrete. No. Size Wire *SWL Tension (lbs) Min. Edge Distance Wt (lbs) CFI FL38 3/8" x 2-3/4" .243 2,000 10" .15 CFI FL12 1/2" x 2-3/4" .243 2,000 7" .21 CFI FL58 5/8" x 3-1/2" .258 2,200 8" .34 CFI FL34 3/4" x 3-1/2" .258 2,200 8" .38 CFI FL1 1" x 6" .375 5,300 10" .60 Other sizes and galv available on request. No. Size Wt (lbs) CFI FP38 3/8" .005 CFI FP12 1/2" .007 CFI FP58 5/8" .009 CFI FP34 3/4" .010 CFI FP1 1" .012 INSERTS - FERRULE