MASCO Catalog: Concrete Forming & Accessories

171 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T POUR IN PLACE ANCHOR BOLTS Anchor Bolts Anchor bolts are fabricated from low carbon steel for use in the limited load requirements of a foundation bolt. Available in 1/2" ,5/8" and 3/4" diameters with national course thread. All sizes are furnished with N.C. nut only. Nuts - N/C Nuts are used with all sizes N/C bolts and rod, the nust are fabricated from carbon steel. Washers Washers are used with all sizes of bolts and rod. The washers are fabricated from carbon steel. Anchor Bolt Sleeve The unique high-density polyethylene plastic design provides flexibility. If sizing is required, simply cut the sleeve at the gage line as shown. Anchor Bolt Sleeves provide a grout pocket around the anchor bolt to allow the bolt to be positioned exactly. They provide a quick, easy way to make final adjustments and a clean pocket for grouting at lower cost than other methods. No. Size Wt (lbs) Qty/Bag CT 126BOLT 1/2" x 6" 0.35 100 pcs CT 128BOLT 1/2" x 8" 0.45 100 pcs CT 1210BOLT 1/2" x 10" 0.51 100 pcs CT 1212BOLT 1/2" x 12" 0.61 100 pcs CT 588BOLT 5/8" x 8" 0.70 50 pcs CT 5810BOLT 5/8" x 10" 0.82 50 pcs CT 5812BOLT 5/8" x 12" 1.0 50 pcs CT 348BOLT 3/4" x 8" 1.1 50 pcs CT 3410BOLT 3/4" x 10" 1.3 50pcs CT 3412BOLT 3/4" x 12" 1.5 50 pcs Hot Dipped Galvanized CT 1210BOLTHD 1/2" x10" 0.51 100 CT 5810BOLTHD 5/8" x10" 0.82 50 CT 5812BOLTHD 5/8" x12" 1.0 50 CT3410BOLTHD 3/4" x 10" 1.3 50 CT 3412BOLTHD 3/4" x12" 1.5 50 Other sizes available on request. No. Size Wt (lbs) CT 12WASH 1/2" 0.04 CT 58WASH 5/8" 0.08 CT 34WASH 3/4" 0.11 CT 1WASH 1" 0.17 CT 114WASH 1-1/4" 0.21 No. Size Wt (lbs) CT 12NUT 1/2" 0.04 CT 58NUT 5/8" 0.08 CT 34NUT 3/4" 0.12 CT 1NUT 1" 0.32 No. Bolt Size Sleeve Size Wt (lbs) Qty/Ctn SI 1701 1/2", 3/4" 2" x 5" 0.10 100 SI 1704 5/8", 3/4", 7/8" 2" x 7" 0.10 100 SI 1706 1", 1-1/4" 3" x 10" 0.26 50 SI 1708 1-1/2", 1-3/4" 4" x 15" 0.60 20 SI 1710 2", 2-1/4" 4"x 18" 0.75 20 Anchor Bolt Holder Fits ½" to ¾" diameter anchor bolts. Anchor bolt locks into e-z bolt sleeve with locking ring and is then placed into the base. Unique design allows for vertical height adjustment of anchor bolts. Assures proper placement of anchor bolts on elevated slabs. Base Plate holder attaches to the decking by nail or staple. No. Qty/Ctn Wt/Ctn (lbs) AZ ABH 100 16.0 PROJECTION AS REQUIRED TOP OF CONCRETE ANCHOR SLEEVE GROUT ANCHOR BOLT WALL PLATE ANCHOR 8d MINIMUM LENGTH