MASCO Catalog: Concrete Forming & Accessories

70 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TIEING/HANDSET COIL THREAD Screw-On Coil Tie The Screw-On Coil Tie is designed to be attached to the first erected side of the form. This system is ideally suited for forming heavily reinforced walls as it eliminates the "fishing" of ties through a form, reinforcing steel and the opposite side form. Once the closure form is set in place, it is easy to install the remaining coil bolts and hardware. When the screw-on cones are attached to the coil tie, they provide a positive setback for the tie and act as a fixed internal form spreader. To order specify bolt diameter, safe working load, tie length, wall thickness and set back. No. Size Strut SWL Tension (lbs) Wt (lbs) 1/2" Standard 2 4,500 1/2" Heavy 2 6,750 3/4" Standard 2 6,750 3/4" Heavy 2 9,000 1" Standard 2 13,500 1" Standard 4 18,000 1-1/4 Standard 4 27,000 SWL provides a factor of safety of approximately 2 to 1. WALL THICKNESS TIE LENGTH SETBACK SETBACK Screw-On Cone Screw-On Cones are threaded internally with coil threads in the small end of the cone. It is threaded onto the extended ends of the screw-on coil tie and cannot be knocked off the tie. Use a cone removal wrench to back the cone off the tie and out of the concrete. Plastic cones are reusable. No. Bolt Size Setback Wt/Lf (lbs) DS 35151 1/2" 1-1/4" 1" 0.05 DS 35135 3/4" 1-5/8" 1" 0.07 DS 35138 1" 2-1/8" 2" 0.17 DS 35139 1-1/4" 2-3/8" 2" 0.19 Other sizes available on request. COIL TIE SETBACK