MASCO Catalog: Concrete Forming & Accessories

115 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T FORM TREATMENT FORM RELEASE Kleen Kote Description : A water based industrial release that is V.O.C. compliant. It helps prevent asphalt, concrete, dirt and other debris from sticking to treated equipment, forms, hand tools and trucks. Deposits a very thin film causing the surface to become virtually non-stick. Environmentally safe and does not contain any solvents or phosphates. Kleen Kote is water soluble. Non-Staining and Non-Dusting. Meets Army Corp. of Engineer Specs. Application : Can be used as a rust inhibitor. Safe for use on all surfaces. Will not rinse off in the normal rain once a day. Economical - Concentrate mixes easily with water. Concentrate form reduces your shipping costs. Using a clean spray container add Kleen Kote & water to achieve the recommended ratio for your application. Adding to water and then adding more water will eliminate need for mixing. May be applied at any time. Application surface should be clean prior to use. Remove all other release agents before applying.Spray on, then let change from white to clear before using. Reapply after every use. Concrete Forms: Wood, aluminum, plastic etc. - make sure to clean or cast off as much of the old release as possible to eliminate any reaction between Kleen Kote and your old form release. Do NOT switch back and forth between Kleen Kote and other release agents. If forms are new, season them just as you would with oil. 11 to 1 for porous surfaces and 15 to 1 for non-porous surfaces. Coverage : 1 gallon of Kleen Kote is required to cover approximately 1,000 to 2,000 ft², depending on surface type. Spray on for best performance and ease of application. No. Size PCS KK1 1 gallon, 10 lbs., 4/case PCS KK 5 gallon, 50 lbs., 24/pallet WATER BASED EMULSION Mascokote Green Description : A chemically reactive, non-petroleum, biodegradeable release agent for concrete forms which effectively prevents the bonding of concrete to steel, conditioned aluminum, plywood, composite forms, and formliners. MASCOKOTE GREEN is manufactured with organic chemicals which reacts with concrete to prevent adhesion and provide a quick, easy release. It contains no diesel, petroleum, kerosene, wax or silicones. Using canola as a base, this product is highly biodegradable under the CEC L.33 test protocol in 21 days and contains no harmful additives. MASCOKOTE GREEN is a thin amber liquid that remains fluid at subfreezing temperatures. Application : Forms should be free of dirt, hardened concrete, rust, scale, and other foreign matter. Release agent is ready to use direct from container. Apply a thin film using an atomizing or misting spray tip to maximize product performance and economy. Spray uniformly with cross spray to avoid pin holes and uncoated areas. Over application will not produce better results and may cause dusting. Puddles should be wiped up with rags prior to pouring concrete. Prior to coating plywood forms, apply one or two heavy brush coats to edges for waterproofing protection. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating Navy Dock and Piers 56359 V.O.C. Compliant Coverage : Steel, Plastic, Fiberglass: 1000 sq ft/gal Conditioned Aluminum: 1000 sq ft/gal HDO plywood: 1000 sq ft/gal MDO plywood: 750 sq ft/gal Dimensional Lumber 500 sq ft/gal BB Grade plywood 500 sq ft/gal No. Size MS 5GMKGRN 5 gal. pail, 50 lbs., 24/pallet MS 55GMKGRN 55 gal. drum, 550 lbs. BIODEGRADABLE BASED