MASCO Catalog: Concrete Forming & Accessories

116 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T FORM TREATMENT FORM RELEASE No. Size MS 5GBR 5 gal. pail, 50 lbs., 24/pallet MS 55GBR 55 gal. drum, 550 lbs. Masco Bio Release Description : Using the latest micro-emulsion technology, Masco Bio Release is an innovative, 100% natural, organic chemical release agent. Provides quick, easy release and leaves an architectural bondable concrete surface. Application : Ideal for sensitive environmental situations such as bridge framework over rivers and streams or potable water reservoirs. Chemically releases concrete from plywood, steel, aluminum, polystyrene, and fiberglass forms and formliners. Prevents concrete build- up on all equipment. Cleans and reconditions forms. Helps eliminate build-up and bug holes. Applicable Standards : Corps of Engineers CEGS-03300, Section 10.8 Form Coating. Navy Dock and Piers 56359. V.O.C. Compliant. 100% Biodegradable. Coverage: Steel, Aluminum, Plastic, High Density Plywood: 1,000–1,500 ft²/gal. Medium Density Plywood, Paper Column Forms: 1,000–1,250 ft²/gal. BB Grade Plywood: 1,000 ft²/gal. Rough Sawn Lumber, Straited Plywood: First use, 2 coats: 500 ft²/gal./coat Subsequent uses: 1,000 ft²/gal. WATER BASED EMULSION No. Size ACC 5GSSR3 5 gal. pail, 50 lbs., 24/pallet SSR 3 Description : SSR3 (Synthetic Stone Release) is a ready to use, non-toxic, water-based stable emulsion with excellent release and surface consolidation properties. It is formulated to reduce surface imperfections in precast, prestressed and cast-in-place concrete. It works well on all types of form surfaces as well as rubber, plastic or urethane form liners. Promotes easy removal, provides a water repellent, rain resistant and rust inhibiting film to the formwork. It is suitable for both indoor and outdoor applications particularly where VOC emissions are limited in the workplace. Application : Applied as a release agent and surface consolidating agent on all types of formwork, including but not limited to wood, metals, polyester coated, plastic, rubber or urethane lined surfaces where a high quality release and void free surface are of the utmost importance. When the water is atomized by high-pressure spray application, SSR3 is ideal for automated wet cast production facilities when an airless spray bar is used to apply the release in-line. Suitable for all types of cements, white or gray, colored and non- colored as well. Consult data sheet for complete application instructions. Coverage : 5 gallon pail yields 2,500 – 3,500 sq.ft ./gal.