MASCO Catalog: Concrete Forming & Accessories

193 MASONS SUPPLY COMPANY Oregon (800) 537-3407 ♦ Washington (800) 537-6216 Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Ridgefield | Seattle | Tacoma | Woodinville M A S C O . N E T TILT-UP/PRECAST TILT-UP Tilt-up 3 system Offers the Tilt-Up contractor an economical, strong method to lift, handle and place concrete tilt-up wall panels. The System features a design that utilizes the same lifting hardware for both face lift and edge lift applications. This system is a high quality, high strength, quick connect disconnect. T-90-F Face Lift insert Furnished as an assembly, complete with the strong forged foot insert, wide spread, stable plastic base, floating rebar clip and plastic locator setting plug. The face lift insert is easy to position and tie to the rebar mat. The rebar clip provides a quick, positive method of fastening the insert to the rebar mat. The clip slips onto the body of the insert where it floats with any movement of the rebar mat, preventing misalignment of the insert due to fluctuations of the rebar mat. T-92 lifting hardware Consists of a clutch body, curved bolt/release arm and high strength bail. The bail is designed to readily align itself to the pull of the rigging. Once the hardware is properly engaged and under load, the hardware cannot be disengaged. Remote ground release is easily accomplished after the load has been relaxed. The hardware is designed to service both face lift and edge lift system conditions. SWL is 15,000 lbs. with an approximate factor of safety of 5 to 1. DO NOT use with seeded aggregate 1/2" or larger as aggregate may "pop out" during the erection process, resulting in a reduced insert safe working load. T-90-F face Lift Insert T-90-C Floating Rebar Clip T-92 Lifting Hardware Structural Panel Thickness 5" 5-1/2" 6" 6-1/4" 6-1/2" 7" 7-1/4" 7-1/2" 8" Insert Safe Working Load (lbs) 8,000 10,000 12,000 12,500 13,000 15,000 15,000 15,000 15,000 T-90-F Face Lift Insert Selection Chart: No. Wt (lbs) DS 122026 10.0 No. Size Wt (lbs) DS 5FL 5" 1.60 DS 512FL 5-1/2" 1.65 DS 6FL 6" 1.70 DS 612FL 6-1/2" 1.75 DS 7FL 7" 1.80 DS 712FL 7-1/2" 1.85 DS 8FL 8" 1.90 SWL provides a factor of safety of approximately 2 to 1 in 2,500 psi normal weight concrete. Consult manufacturers data on values on shear and reduced edge distance.