190 322
190
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
SLAB/HORIZONTAL
Poly Burlap Curing Blanket
Poly Burlap curing blankets are a combination of 10 oz. burlap
and 5 mil white opaque poly. The 5 mil polyethylene is extruded
onto the 10 oz. burlap. The result is a lightweight water curing
blanket that can be used over and over again. The burlap layer
distributes the water evenly over the covered surface, while the
white opaque poly reflects the intense rays of sun. This way, the
concrete is allowed to cure properly. After each use, expose
burlap side to the sun or air. The burlap will be ready to use
again quickly. Meets AASHTO M-182, Class II, and ASTM C-171
specifications when chemical cures are not allowed.
No.
Size
Wt (lbs)
MC 10100CL
10' x 100'
76.0
CURING BLANKETS
No.
Size
Wt (lbs)
RF TG4000 10' x 150' (1500 SF)
95.0 approx.
Transguard
®
4000 - Reusable Wet Cure Covers
Consists of a natural colored polypropylene non-woven fabric
with a 4 mil coating applied to one side that allows for proper
moisture control during the concrete curing process, reducing
cracking, dusting and scaling. The lightweight, reusable wet
cure covers are more flexible than other curing materials,
resulting in much easier installations, that save time, labor and
money. The nonperforated white coating contains ultraviolet
light stabilizers providing protection against UV degradation.
Transguard
®
4000 is reflective - reflects heat to decrease moisture
loss (85% reflectance, ASTM E-1347). It also meets or exceeds
AASHTO M-171 and ASTM C-171, "Standard Specification for
Sheet Materials for Curing Concrete" for moisture retention
and reflection. The material must be applied with the white
polyethylene side up, so that moisture will entirely cover the full
span of the deck. Overlap blankets at least 6". Transguard
®
4000
should be soaked thoroughly on the non-woven synthetic side,
re-wetting when necessary may be performed by the use of a
soaker hose or equivalent.