148 322
148
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
FORM TREATMENT
FORM RELEASE
Mascokote Premium
Description
: A reactive form release
with a mineral carrier that leaves an
architectural or high visual impact
concrete surface. Manufactured
with virgin oil and organic chemicals
which react with the concrete to
prevent adhesion and provide a
quick and easy release. Films rapidly
on all form surfaces, not slippery,
prevents accumulation of dust, and
cannot be removed by normal rain
showers. Will not break down with
steam. Water insoluble, contains no
kerosene, diesel, silicone or waxes to
reduce effectiveness and damage
formwork. It is a thin amber liquid
that remains fluid at subfreezing
temperatures and can be stored
indefinitely. Produces architectural
concrete by eliminating bug holes
caused by thick form oils. Provides a
quick, easy release without staining,
discoloration, or pitting. Leaves
no residue or cement dust on the
concrete surface when properly
Application
: Specially formulated for
use on aluminum and steel forms, but
also effective on plywood, composite
forms, plastic and urethane formliners.
Ideal for architectural precast.
Applicable Standards
:
Corps of Engineers CEGS-03300,
Section 10.8 Form Coating. Navy
Dock and Piers 56359. V.O.C.
Compliant.
Coverage
:
Steel, Plastic, Fiberglass: 2000 sq ft/gal
Conditioned Aluminum: 2000 sq ft/gal
HDO Plywood:
2000 sq ft/gal
MDO Plywood:
1500 sq ft/gal
Dimensional Lumber:
1000 sq ft/gal
BB Grade Plywood:
1000 sq ft/gal
applied. Concrete is left with an
architectural surface and ready for
application of curing compounds,
sealers, and coatings. When any
material is to be applied on top of
the concrete, follow the application
instructions of the material
manufacturer.
No.
Size
MS 5GMKP 5 gal. pail, 50 lbs., 24/pallet
MS 55GMKP 55 gal. drum, 550 lbs.
Mascokote VOC
Application
: Forms should be free
from dirt, hardened concrete
and foreign matter. Release
agent is ready to use direct from
container. Can be applied with
a sprayer, roller or brush at all
working temperatures. Apply a thin
film for maximum protection and
economy. Spray areas uniformly.
Over application creates dusting.
Prior to coating plywood forms,
apply one or two heavy coats to
edges for waterproofing protection.
When subsequent material is to
be applied to the concrete, follow
the application and preparation
instructions of the material
manufacturer.
Applicable Standards
:
Corps of Engineers CEGS-03300,
Section 10.8, Navy Dock, and Piers
56359, VOC Compliant.
Coverage
:
Steel, Plastic, Fiberglass: 2000 sq ft/gal
Conditioned Aluminum: 2000 sq ft/gal
HDO Plywood:
2000 sq ft/gal
MDO Plywood:
1500 sq ft/gal
Dimensional Lumber:
1000 sq ft/gal
BB Grade Plywood:
1000 sq ft/gal
Description
: A chemical active
release agent in a mineral oil
carrier for concrete forms which
effectively prevents bonding of
concrete to the form. For use in steel,
plywood, and treated aluminum
forms. Manufactured with virgin
oil and organic chemicals which
react with the concrete to prevent
adhesion and provides a quick
and easy release. This quick, easy
release is provided without staining,
discoloration or pitting and leaves
no residue or cement dust on the
concrete surface if properly applied.
Concrete is left with an architectural
surface ready for application of
curing compound, sealer, bondable
for plaster, mastics or paints
when used in accordance with
manufacturer’s instructions.
No.
Size
MS 5GMK 5 gal. pail, 50 lbs., 24/pallet
MS 55GMK 55 gal. drum, 550 lbs.
PETROLEUM BASED