149 322
149
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
FORM TREATMENT
FORM RELEASE
Kleen Kote
Description
: A water based industrial
release that is V.O.C. compliant. It
helps prevent asphalt, concrete,
dirt and other debris from sticking
to treated equipment, forms, hand
tools and trucks. Deposits a very thin
film causing the surface to become
virtually non-stick. Environmentally
safe and does not contain any
solvents or phosphates. Kleen Kote
is water soluble. Non-Staining and
Non-Dusting. Meets Army Corp. of
Engineer Specs.
Application
: Can be used as a
rust inhibitor. Safe for use on all
surfaces. Will not rinse off in the
normal rain once a day. Economical
- Concentrate mixes easily with
water. Concentrate form reduces
your shipping costs. Using a clean
spray container add Kleen Kote &
water to achieve the recommended
ratio for your application. Adding to
water and then adding more water
will eliminate need for mixing. May
be applied at any time. Application
surface should be clean prior to use.
Remove all other release agents
before applying.Spray on, then let
change from white to clear before
using. Reapply after every use.
Concrete Forms:
Wood, aluminum,
plastic etc. - make sure to clean or
cast off as much of the old release
as possible to eliminate any reaction
between Kleen Kote and your old
form release. Do NOT switch back
and forth between Kleen Kote and
other release agents. If forms are
new, season them just as you would
with oil. 11 to 1 for porous surfaces
and 15 to 1 for non-porous surfaces.
Coverage
:
1 gallon of Kleen Kote is required to
cover approximately 1,000 to 2,000
ft², depending on surface type.
Spray on for best performance and
ease of application.
No.
Size
PCS KK1 1 gallon, 10 lbs., 4/case
PCS KK 5 gallon, 50 lbs., 24/pallet
No.
Size
ACC 5GTR 5 gal. pail, 50 lbs., 24/pallet
Tuff Release
Description
: Semi-Liquid, high viscosity
release which ensures the highest
quality architectural and structural
surfaces. Will not stain the concrete
or affect adhesion of waterproofing
or other coatings. Designed for use
with the most intricate molds and
forms; especially with low or no draft
applications and when using highly
superplasticized (SCC) mixes. May
be used on all types of formwork
including plastic, rubber or styrofoam.
Application
: Remove any oil or
grease residues from the form surface
left from previously used releases.
Apply Tuff Release in a very thin coat
by brush, roller or by spray using a
High Volume Low Pressure spray gun
or by jiffy mop with a swivel assembly.
Wipe out excess oil with a slightly oil
moistened mop or rag. Allow surface
to dry prior to concrete placement.
No.
Size
ACC 5GRR 5 gal. pail, 50 lbs., 24/pallet
Ruff Release
Description
: A unique thickened
blue colored release agent primarily
for low or no draft applications on
rough, irregular or smooth surfaces.
Ruff Release yields a smooth and
easy release from all types of form
surfaces.
Application
: Apply Ruff Release to
the most intricate and difficult form
surfaces where release stresses may
pose problems or wherever release
issues are anticipated. Ruff Release
works well in all applications and will
not stain the surface on which it is
used. May be used on all types of
form surfaces including plastic, rubber
or styrofoam. Apply a very thin coat
with a rag, sponge or swivel type
mop. Wipe off excess prior to casting.
WATER BASED EMULSION