154 322
154
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
FORM TREATMENT
Altus
FORM RETARDERS
Application
: Thoroughly mix before
application. Apply a single hiding
coat of Altus retarder using a brush,
roller, or airless sprayer at a rate of
250–300 sq.ft./gal.
Coverage
: Approximately 250–300 sq.ft./gal.
Description
: High performance in-form
retarder with excellent heat resistance.
Altus is especially suited for insulated
panels where moisture levels are
critical. Available in different depths
of etch. A test panel-simulating job
conditions should be poured for proper
grade selection.
No.
Color
Recommended Aggregate Size
ACC WALL25
Orange Medium Sand Blast Texture
1/4"–3/8" Aggregate
ACC WALL50
Blue Deep/Heavy Sand Blast Texture
3/8"–1/2" Aggregate
ACC WALL125 Green Medium Aggregate Full Depth Exposure
1/2" Aggregate
ACC WALL250 Gray X-Large Aggregate Full Exposure
3/4" + Aggregate
Size:
5 gal. pails, 50 lbs., 24/pallet
No.
Size
ACC 5GPCWB 5 gal. pails, 50 lbs.,
24/pallet
Precote WB
Description
: An innovative water-based
undercoat release for use with Altus
Series In-Form retarders. Perfectly suited
for architectural precast concrete of
all types.
Application
: Apply In-Form retarder
Pre-Cote to the mold surface in a
thin coat by brush or by roller at a
rate of 400-500 sq.ft./gallon. Pre-Cote
WB dries in 20-30 minutes depending
upon the ambient temperatures and
humidity. When dry proceed with the
selected grade of Altus Series In-Form
Retarder.
Coverage
: Approx. 400 – 500 sq.ft./gal.