122 322
122
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
TIEING/HANDSET
Flat Snap Tie
The flat snaptie provides support through the
horizontal joints between the plywood panels.
Breakback after stripping is accomplished with a
horizontal hammer blow. 100 per carton.
Flat Snaptie Wedge
Used to take up and secure flat snaptie ties to
the panels. The wedge is secured with a vertical
hammer blow and is released during stripping
with a reverse hammer action. 50 per carton.
Twisted Wire Tie
Twisted Wire Ties supplied with E-Z BreakBack ends.
Ties can be broken off flush with the wall surface
quickly and easily, usually with a stroke or two of a
hammer. Economical and typically used where surface
appearance and clean breakback are not essential.
Ties are made of 11 gauge galvanized wire, with a safe
working load of 1,000 lbs. 100 pieces per bundle.
SWL provides a factor of safety of approximately 2 to 1
No.
Size
Wt/Ctn (lbs)
GT 19060
6"
8.0
GT 19080
8"
10.0
CT 58SD
5/8" x 20" 20.0
No.
Size
Wt/Ctn (lbs)
CT 6118FT
6" x 1-1/8"
30.0
CT 8118FT
8" x 1-1/8"
35.0
CT 10118FT
10" x 1-1/8" 40.0
CT 12118FT
12" x 1-1/8" 45.0
No.
Wt/Ctn (lbs)
CT FTW
37.0
RESI-FORM TIES