Table of Contents Table of Contents
Previous Page  227 322 Next Page
Information
Show Menu
Previous Page 227 322 Next Page
Page Background

227

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 ♦ Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville

M A S C O . N E T

POUR IN PLACE

No.

Size

Description

Wt/Lf (lbs)

JP 436 4" x 3/16" Ribbed Center Bulb 0.40

JP 636 6" x 3/16" Ribbed Center Bulb 0.70

JP 936 9" x 3/16" Ribbed Center Bulb 1.07

Factory Made Splices Available

● Eliminates intricate field splicing.

● Permits faster waterstop installations.

● Insures correct splicing in critical areas.

● Eliminates guesswork.

Heating Iron

For PVC Waterstop, cut ends square and hold both sides against

iron to 350°- 380° F. Do not allow the iron to reach 400° F, PVC will

degrade and turn dark color. When about 1/8" to 1/4" of material

becomes soft and gummy, remove the iron and press ends

firmly together. Hold tightly and allow material to cool before

applying stress. All center bulb waterstop must be aligned.For TPE

Waterstop preheat iron to 380° to 410° F. 115 volt, 6 amps, 6' cord.

Hog Ring

7/8" opening hog rings should be placed at the outer most rib of

waterstop 12" on center. Tie off to reinforced steel.

Hog Ring Plier

Chemical Resistent

TPE-Rubber Waterstops greatly expand the scope of

conventional Waterstops because they do not degenerate

under a host of aggressive chemicals, solvents and hot

petroleum oils that would destroy PVC. TPE Rubber Waterstops

are capable of withstanding joint movement. TPE Rubber

Waterstops also have an added advantage of being joined with

our regular Waterstop Splicing Irons. The intended use for TPE

Rubber Waterstops is for primary and secondary containment

facilities where compatibility, resistance and performance values

determine the choice based on the specific application test

data. TPE Rubber Waterstops are available in 4", 6" and 9" ribbed

centerbulb design; which provides for movement within a joint

and may be used for above or below grade applications.

No.

Wt (lbs)

CT HRP 0.50

No.

Size

CT HR #3, 25 lbs/carton (88 pieces/lbs approx)

No.

Size

Wt (lbs)

GS 214

2" x 14"

4.00

GS 214C 2" x 14" Teflon Cover

0.17

GS 414

4" x 14"

8.00

GS 414C 4" x 14" Teflon Cover

0.34

GS 414

GS 214

Vertical Ell

Flat Ell

Vertical Tee

Flat Tee

Vertical Cross

Flat Cross

WATERSTOP