259 322
259
MASONS SUPPLY COMPANY
Oregon (800) 537-3407 ♦ Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Ridgefield | Seattle | Tacoma | Woodinville
M A S C O . N E T
TILT-UP/PRECAST
PRECAST
P-93 L-Anchor
The P-93 L-Anchor has a simple but efficient design capable
of high pullout strengths. The L-Anchor is designed for face
or edge lifting, and due to its strength and economy, is used
commonly in earth retaining type panels. The P-93 L-Anchor in
only available in 1 ton capacity. A special recess member with
a narrow anchor slot is used in conjunction with this anchor.
No.
Size
Wt (lbs)
DS FL050
2 ton
0.30
P-95 Plate and Flat Foot Anchors
P-95-F Flat Foot and P-95-P Plate Anchors are designed to be
installed in the back of thin panels. These anchors have high tension
and shear capacities and are easy to reinforce, when required.
P-95-P Plate Anchors are available in 2, 4, and 8 ton capacities. P-95
-F Flat Foot Anchors are available in 2 and 3 ton capacities. When
higher capacities are required, a Plate should be used.
P-95-F
P-95-P
No.
Size
Wt (lbs)
P-95-F
DS FL058
2-3/4"x2 ton
0.50
DS FL400
3-3/8"x2 ton
0.58
DS FL157
3-3/4"x3 ton
0.92
P-95-P
DS FL128
2-1/4"x2 ton
0.71
DS FL044
4-3/8"x4 ton
1.96
DS FL043
6-7/8"x8 ton
4.36
P-99 Recess members and accessories
Recess Members are specially designed to hold Fleet-
Lift anchors securely in place during the placement of
concrete. The Recess holds the anchor at the proper
depth below the concrete surface and creates a void
for the ring clutch. The small void is easily patched to
prevent exposure of the anchor to the elements. Recess
Member is manufactured with an iron insert threaded
with durable 3/8" coil threads to accept the 3/8" holding
rod. All Fleet Lift Recess members utilize the same P-101
holding rod. Fleet-Lift Recess Members are available in 1,
2, 4, and 8 ton sizes.
No.
Size
Wt (lbs)
P-99
DS FL051
1 Ton
0.21
DS FL200
2 Ton
0.20
DS FL062
4 Ton
0.50
DS FL121
8 Ton
1.50
P-99-D Recess members and accessories
P-99-D Fleet-Lift Disposable Recess Plug can be used to
preset Fleet-Lift face-lift or edge-lift anchors or can be used
to "wet set" P-94 Anchors. The Cover/Patch fits tightly onto
the recess plug to fully protect the unit. The Cover/Patch is
concrete gray in color and can be used as a patch over the
recess opening for temporary or permanent cover.
No.
Description
Size
Wt (lbs)
DS FL067B Body
4 and 6-ton
0.10
DS 067L Lid
4 and 6-ton
0.10
DS 067S Set
4 and 6-ton
0.20
P-99
P-99-D